.svg){kind=logo}
Base for smart switch
Base unit to which a decorative cover is attached. The buttons are configurable to control lights or blinds. Includes temperature and humidity sensors. Dimmable night light from the sides.
For a complete switch, you need to order the base and the cover separately. We will assemble them and ship the complete product.
| Category: | Smart Switch (Generation 2) |
|---|---|
| EAN: | Choose variant |
| naskladnenie: | 19.12.2025 |
Features
- Touch control
- Acoustic feedback
- Temperature and relative air humidity sensor
- Dimmable LED light from the sides
- 1 UI input for floor temperature sensor or other additional input
- Dimensions 88x88x12 mm
- It works on the internal TapHome bus with wired power and communication
- Power consumption max. 0.1 W with LED off / 0.2 W with LED on
- Operating temperature 0 to 40 °C
- Installation in a standard junction box for light switches
Installation and Disassembly
Installation: First, secure the installation frame onto the KU installation box, ensuring that the arrow labeled “TOP” points upwards and the ventilation openings are facing downwards. Then, snap the product onto the installation frame by first inserting the hooks on the top of the product into the frame, and then gently pressing to secure the bottom part. Disassembly: Insert a narrow flathead screwdriver into the small notch on the hook at the bottom of the installation frame. Gently pry the hook out of its socket and hold it in place with your hand to prevent it from snapping back into its original position. Repeat this process on the hook on the other side, which will release the bottom part of the product, allowing you to remove it completely.
